Description
|
Permaquik
PQ 6100 is a blend of both synthetic rubber and natural rubber
in a specially selected compatible bitumen. This blend produces
a product that gives excellent waterproofing performance with
toughness, flexibility, adhesion with a very wide temperature
acceptance beyond conventional bitumens and asphalts levels.
BBA approved Cert 97/3336 Third Issue |
| Uses |
Permaquik
PQ 6100 where combined with other components of Permaquik and
Radmat range present various options for waterproofing systems. |
| Application |
Buried
waterproofing situations
• DPM
• Inverted Roof Assemblies
• Plazas
• Garden zones
|
| Physical
Properties |
| Test
(units) |
| Fines
content (%) |
MOAT
31 : 6F |
46.3 |
| Oil
loss (%) |
|
0.02 |
| Density
(gcm–3) |
ISO
1183 : 1987 |
1.33 |
| Moisture
absorption (%) |
BS
2782 : Part 4
430A : 1983
|
0 |
Ring
and ball softening
point (°C) unaged
|
BS
2000 : Part 58
: 1993 |
110 |
| Heat
aged 56 days at 70°C |
|
102 |
| Heat
aged 180 days at 70°C |
|
92 |
| Resistance
to imposed load (mm) at termination of test (hrs) |
ad
hoc (1) |
|
5
kg
10 kg
20 kg |
0.90 (102)
1.56 (143)
3.67 (457) |
| (1)
Samples 6 mm thick on 300 mm by 300 mm concrete slabs. Loads
of 5 kg 10 kg and 20 kg were applied to 150 mm by 150 mm steel
plates placed on the samples at 23°C, and indentation with
time was recorded. |
| Preparation |
PQ
6100 is heated in an oil-jacketed roofing bitumen kettle or
melter equipped with means of mechanical agitation and temperature
indicators for both oil and melt. |
| Packaging |
PQ
6100 is supplied in 22.0 kg cakes in a large metal drum containing
10 x 22.7 kg cakes double wrapped in polythene. |
| Procedure |
| a. |
Remove outer wrapping of polythene and place in kettle/melter.
|
| b. |
Start
mechanized circulation and continue whilst heating to
avoid localised overheating. |
| c. |
Add
more materials as required. |
| d. |
Application
temperature : 180°C – 205°C |
| e. |
DO
NOT HEAT ABOVE 210°C
|
|
| Installation |
Apply
to approved surface in two-coat application by flat bladed squeegee
reinforced with PQ 2016 polythene fabric. Nominal thickness
6.0 mm in two coats followed by application of required protection
sheet.
Consult Radmat PQ 6100 Pre-installation and application control
procedures publication for further details. |
| Specifications |
Re-roofing
and New Roof Installation advice will be provided by Radmat
Building Products on request.
Full technical back-up will be provided in line with current
requirements in conjunction with site visit to adjudge the
general specification, approved contractor installations and
after sales service.
No two roofs are identical, therefore individual specifications
need to be considered. |
Rev
1
18.8.03 |
