Description
|
Radmat
Reservoir Board is a lightweight retaining rigid suspected
High Density Polyethelene board with a Geotextile filter thermally
bonded to the HDPE Core. It allows drainage of surplus water
also allowing water retention depending on the back fill material.
|
| Typical
Properties |
| HDPE
Core with Geotextile Filter |
| Nominal
Roll Length |
50
metre |
| Nominal
Roll Width |
0.915
metre |
| Nominal
Roll Weight |
63
kg |
| Nominal
Thickness |
27.3
mm |
| In
plane Water Flow |
HG1.0
(1:1) |
HGO.1
(1:10) |
| At
100kPa (l/m/sec) |
16 |
5 |
Board
water storage (l/m²)
|
7/L/m² |
| Chemical
resistance |
Excellent
resistance to all common chemicals |
| Bacteria/fungi |
Does
not support growth |
| Health
Safety Environment |
Inert.
No known health hazards |
| |
| Notes |
1)
The Geotextile is bonded to the core to prevent intrusion into
and blockage of the water retention reservoirs
under the action of pressure of backfill material.
2) The values given are indicative and correspond to nominal
results obtained in our laboratories and testing
institutes. The right is reserved to make changes without notice
at any time.
3) Allowable tolerances are +/- 10% of the typical value.
4) Refer to separate sheets for fixing instructions and packing
dimensions.
5) Non load bearing walls can be built of Rootdrain
6) Water retention within the soil 20-40l/m² (dependent
on thickness of the soil backfill)
|
|
13.9.04 |
